Vanwege vakantie worden bestellingen pas vanaf 29 augustus verzonden. Excuses voor het ongemak!
my cart 0 Items - € 0,00

Shopping cart(0)

Er zijn geen items meer in uw wagen
inclusief BTW € 0,00
Totaal (incl. btw) € 0,00
Mini Mr. Bulletfeeder Rifle

Scroll mouse to zoom in or zoom out

  • Mini Mr. Bulletfeeder Rifle
  • Mini Mr. Bulletfeeder Rifle

Mini Mr. Bulletfeeder Rifle

€ 115,00
Tax shipping:
Inclusief belasting

Mini Mr. Bulletfeeder Rifle

Reference:

Availability:
Laatste items in voorraad
Kaliber:
Aantal:

Print

The Rifle Mini Mr.Bulletfeeder by DAA uses a 6-tube magazine system which holds roughly 70-100 bullets, depending on bullet caliber and length. It feeds into the same brilliantly reliable dropper die assembly as used on the Mr.Bulletfeeder. 

 

Using a Bulletfeeder while reloading is a real pleasure. It makes the reloading process faster and much easier. If you have never used one, you are missing out on one of the greatest reloading assists out there! A Bulletfeeder also improves safety, by preventing the need to insert your fingers under the tool head to place your bullets on the brass. Everyone should use one! 

 

Each magazine of bullet tubes needs to be filled by hand before reloading, much in the same way you would fill your primer tubes before starting your reloading session. With a little practice, it will take you about 2 minutes to fill the tube assembly. And this can be done in advance while watching TV in the comfort of your living room. Additional tube assemblies can be purchases separately (or as a bundle), thus allowing you to pre-load 300, 400 or more bullets before starting your reloading session. 

 

While reloading, you will see the bullets drop down in the transparent tube, as they feed into the dropper-die assembly. Once a tube is empty, you simply rotate and click the next tube into place and keep reloading. Transition to the next tube takes just a second or two. Once the entire 6-tube magazine is empty, either reload it by hand, or drop your 2nd assembly into place to continue without delay. 

 

The Mini Mr.Bulletfeeder can be used on any progressive reloading machine which uses the same size dies as Dillon. Be aware that the bullet feeder does require a station in your tool head, directly after the powder dropper. 

 

We have found it is difficult to use the Mini Mr.Bulletfeeder on a 1050 when a powder check is being used in the following station. This has to do with the angle in which the powder dropper sits, forcing the bullet dropper to rotate further away, over the next station. This is an issue only on a 1050. 

 

Your Rifle Mini Mr.Bulletfeeder by DAA includes:

1 x 6-Tube Bullet Magazine Assembly

1 x Dropper Die Assembly

3 x Spare Steel Ball-Bearings for Dropper

1 x User Instruction Sheet 

 

No expanding powder funnel is included with this system, because throating the rifle brass in the powder funnel is not possible. That would lead to too small a powder through hole. Flaring the brass must be done as a prep stage or using a modified M-die on the 1050.

1 Item

Datasheet

Soort Herladen
Herlaad Accessoires
Soort Herlaad Accessoire
Bulletfeeder

Specifieke referenties

#htmlcaption1
Commentaar (0)
Geen klantenbeoordelingen op het moment.